Installing a Brick Paver Walkway or Engineering Bricks

The use of Setting up a Brick Paver Walkway or Red Wall Bricks or Pavers to produce a walkway or patio matches a house in a manner in which is unmatched. It includes a level of quality and elegance to a house entrance that can not be achieved with either concrete or asphalt. Brick and Pavers also can be found in numerous various colors and shapes permitting for special color plans and patterns to be achieved. In addition, setting up a Brick or Paver pathway does not always need a pro. With some basic understanding and a relatively basic pathway strategy, a property owner is capable of carrying out such a project.

The key to installing a Brick or Paver Walkway is to first correctly prepare the area where the bricks/pavers are to be set up. In addition, string lines must be strung on each side of the sidewalk.
As soon as the location has been dug down, 3/4" gravel stone need to be laid in and tamped down firmly. The height in between the tamped down sand and the stringline must equal the density of the brick or paver.

Now that you have a steady base, position a 1" pipeline or ledger board the length of the sidewalk on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level surface location to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared location. These strips will serve as your walkway border and aid to maintain the stability and shape of the walkway. You can get these plastic strip borders at the majority of home enhancement read more stores. The strips need to be anchored down with 12" galvinized nails. You ought to sink these nails into the ground and through the strips every foot.

As soon as this is done, you can then begin to lay the bricks/pavers. There are numerous patterns you can lay. I especially like the Herring Bone pattern. The key to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will once again help preserve the stability of the sidewalk.

Undoubtedly bricks/pavers will require to be cut or split when building the sidewalk. To really cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the area where you want to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.

After setting up the bricks, get more info develop up the outdoors edges with extra sand, and after that shovel in the topsoil and load down securely.
Spread stone dust over the brand-new walkway and sweep into the cracks. This will finish the interlocking of the bricks and assist to eliminate any weed growth.


In addition, setting up a Brick or Paver walkway does not necessarily need a pro. The secret to setting up a Brick or Paver Walkway is to very first appropriately prepare the location where the bricks/pavers are to be set up. Now that you have a steady base, place a 1" pipe or ledger board the length of the pathway on either side of the sidewalk. These strips will act as your sidewalk border and aid to maintain the integrity and shape of the walkway. Inevitably bricks/pavers will need to be cut or split when building the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *